Printed Slipcase for 1 Audio Cassette

These cases fit any Norelco case sold by Duplication.com and Analogue Media. The vintage-style cases with square corners have a slightly longer width and will stick out a little bit by approximately 0.2mm.

We cannot guarantee compatibility or a tight fit with any cassette cases not sold by Duplication.com or Analogue Media.

Design your artwork files using the template found at the top of this page. If no template is available and it's also not found in our general templates page, please respond to your confirmation order to request a template. We highly recommend using our templates as templates found from other sources may not fit our printing specs.

Some products allow you to design your artwork in the browser. If you see a "Design Online" button next to "Add to Cart", you can design on this page and it will automatically upload your files upon checkout.

For those supplying their own artwork, you will find an upload link on the order confirmation page after payment. You will also find a link in your confirmation email.

Important Design Tips

- We require PRINT-READY files (ie no transparency effects, export as PDF/X-1A for printing). Design assistance is available as an additional service.
- Artwork for print must be a resolution of at least 300 pixels per inch and in CMYK.
- All paper print items require a bleed of 1/8" (approx 3mm) unless noted.
- Always leave a safety margin of 1/8" from the edge of the paper to important text or visuals - otherwise there is a risk of it getting cut off.
- Make sure your resolution is set to 300 pixels per inch
- Place your artwork in a separate layer

Note for Photoshop users: When you import a PDF please select Crop to: Bleed Box

Left Loading

This design is the one most often seen with multi-book slipcases. When looking at the slipcase over, the cassettes are removed from the left side. This way the front of the J-Card is seen immediately.

Right Loading

With ‘right loading’ slipcases, everything is basically the opposite. When looking at the front slipcase cover the cassettes will be removed from the right-hand spine area. When you remove the closest cassette you will see the back of the top cassette. This design works best when paired with striking pad print or laser engraving designs on the tapes!

Some template downloads will have different files for left loading and right loading, so you can design with your desired file. If only one file is available, flip it 180 degrees before designing so have the opposite orientation.

Our digital Xerox Iridesse printer allows for hot fluorescent colors otherwise not seen in CMYK printing! We also allow for Metallic Gold and Metallic Silver spot colors. More information can be read here.

To provide artwork with hot fluorescent colors:

• Upload an RGB file, and we will take care of the CMYK conversion for print
• or provide a CMYK file with Pantone spot colors

Metallic Gold and Metallic Silver will require layers marked for a metallic overlay.

Print embellishments are not compatible with our online designer and automated uploads.

We will take your JPG, PNG, and any artwork files and fit them into our templates so you don't have to struggle with expensive design software or revisions.

Our custom-print services and products require PRINT-READY files, which necessitate both design skills and design software. It is the industry standard to charge for revisions if the files aren't up to spec during the prepress stage. The Template Layout Preparation services will allow you to simply send us your artwork files, and we will adjust them so they meet spec. This electronic product is to be ordered in addition to another print order.

Electronic proofs will be sent for your approval.

This is not a graphic design service. You must supply your own artwork files. Email us if you'd like graphic design services.

If you are sending PDF, PSD, GIMP, or AI files, supply them with editable layers and font files if at all possible.

This package comes with 1 extra revision before additional charges.