Audio Gear

1/4" x 10.5" empty NAB aluminum take up reel in your choice of colour. Comes in a white hinged box.

Old stock (possibly used) 5.25 inch clear plastic take-up reel with a small hub.

Use these to decorate your home theater!

Not exactly as pictured.

High-performance shotgun condenser microphone capsule AKG CK 80

The CK80 high-performance shotgun microphone capsule provides an 80° pickup angle and offers a speech-optimized frequency response. It offers an unbeatable price/performance ratio and good speech intelligibility in acoustically critical applications. The CK80 capsule fits any mounting module of the DAM Series. To prevent contact problems, the capsule is equipped with large-area, self-cleaning, gold-plated contacts with deep threads to prevent misalignment and ensure extra-long life. The CK80 comes complete with a professional windscreen that reduces wind and pop noise.

General Specifications

Audio frequency bandwidth 60 - 15000 Hz

Equivalent noise level 17 dB-A

Sensitivity 30 mV/Pa

Signal to Noise 77 dB-A

Electrical impedance 600 Ohms

Recommended load impedance 2000 Ohms

Polar Pattern Hypercardioid

AKG GN 15 Gooseneck Module for Microphones

Brand New 

The Audio-Technica AT8202 Adjustable In-Line Attenuator is designed to prevent balanced low-impedance microphones from overloading electronics having low- to mid-impedance inputs in high-SPL applications. The adjustable attenuator is designed to assure the proper match of the microphone to the inputs of mixing consoles and portable recording devices without experiencing input overload of the electronics due to high-level signals. The AT8202 is compatible for use in phantom power applications.

Free Shipping in North America

FEATURES

	Prevents overload of sensitive input stages
	Provides -10 dB, -20 dB or -30 dB attenuation
	Compatible for use in phantom power applications
	Durable steel case provides optimum shielding from hum
	For use with balanced Lo-Z microphones
	Can be plugged directly into an XLRF-type chassis-mount connector

SPECIFICATIONS

With two earphones for stereo sound and a neodymium dynamic microphone for accurate vocal pickup, the ATH-COM2 is ideal for hands-free computer and multimedia applications. The flexible mic boom, cushioned ear pads and lightweight design provide added convenience and prolonged listening comfort. The open-back dynamic headset features a frequency response of 30 to 20,000 Hz, a sensitivity of 90 dB and a maximum input power of 50 mW. Flexible mic boom, cushioned ear pads and overall lightness provide added convenience and comfort. Durable 4.9' cable with two 3.5 mm input/output mini-plugs and two 1/4" (6.3 mm) phone plug adapters included.

SPECIFICATIONS
Type Open-back dynamic
Driver Diameter 40 mm
Frequency Response 30 - 20,000 Hz
Maximum Input Power 50 mW
Sensitivity 91 dB
Impedance 40 ohms
Weight 3.5 oz (100 g)
Cable 4.9' (1.5 m)
Type (Microphone) Neodymium dynamic
Sensitivity (Microphone) -55 dB (1.7 mV) re 1V at 1 Pa

A brand new 1/8" splicing block for repairing audio cassettes

Precision machined from aircraft grade aluminum.

- 90 degree tape cut slot
- Proprietary center tape channel secures tape during use
- Also available in 1/2" and 1/4" formats.

Brand new! 10.5 inch NAB metal reels in white setup box for quarter inch tape. Holds 2500 feet of 1.5 mil tape or 3600 feet of 1 mil tape.

Brand new! 10.5" x 0.5" NAB metal reels in white setup box for half inch tape. Holds 2500 feet of 1.5 mil tape or 3600 feet of 1 mil tape.

Brand new clear 7" plastic reel for your Reel to Reel tape recorder. Available in clear, white, blue, and black! Works with practically all machines like Pioneer, Akai, Teac, Tascam, Revox, Studer, Otari, and more.

Now includes a white hinged setup box (Oct 2022).

Special order, ready to ship in around 2 weeks

A brand new 1/2" splicing block.

Precision machined from aircraft grade aluminum.

- 45 degree and 90 degree tape cut slots
- Proprietary center tape channel secures tape during use
- Also available in 1/8" and 1/4" formats.

Brand new plastic 10.5 inch trident audio reel with box in cine-film-reel style, does not need a NAB hub adapter!

Brand new plastic 10.5 x 1/4" NAB reel with setup box

A brand new 1/4" splicing block.

Precision machined from aircraft grade aluminum.

- 45 degree and 90 degree tape cut slots
- Proprietary center tape channel secures tape during use
- Also available in 1/2" and 1/8" formats.

This is a passive headphone junction box with 1/4" and female XLR inputs, and 6 1/4" outputs.

Calrad's 15-132 headphone junction box provides equal signal output for 1 to 6 stereo headphones, without changing the signal. XLR and 1/4" inputs are provided. This unit can be used with 8 and 600 ohm impedance headphones. Made in Los Angeles, California by Calrad Electronics.

The LM-SM shock-mount accessory isolates a Crown LM-Series microphone from mechanical noise when mounted in a lectern, pulpt, or table top.

Crown Sound Grabber II PZM Condenser Microphone

The Crown Sound Grabber II utilizes the Pressure Zone Microphone technology in which sound waves reinforce themselves in the area nearest a flat surface.

Because of this new technology, Sound Grabber II offers you the opportunity for vast improvement in the quality of your recordings. The Sound Grabber II will pick up sounds at distances you never thought possible and it will pick them up with a clarity that other microphones, because of the limitations of their construction, simply cannot match. The Sound Grabber II does not need to follow the action, since it has a wide-angle pickup pattern. So long as the mic "sees" the sound, in whatever direction or angle, it will pick it up clearly; it does not need to be between you and the other person. Speakers or vocalists can move freely around the Sound Grabber II without their tone quality changing.

Features:

• Ideal for Theater, Conferencing, Houses of worship and Home video
• PZM design makes the sound clearer and more natural
• Ideal for recording conferences, interviews, home videos
• AAA battery powered
• Medium-impedance unbalanced output
• 1/8 in. (3.5 mm) phone connector

Miniature electret condenser microphone made by Japan Piezo Co..

A rare vintage microphone probably made in the 1970s judging by the box design. Appears to be unused and is in mint condition.

The classic Littlite 6G-HI goosneck lamp for mounting on your recording console. 

BNC connector, 12 volt power required. Includes red, blue, and clear light covers, and a spare 1815 Lo-Intensity light bulb. Built to last a lifetime.

This Medquist transcription machine is in perfect condition. Appears to be identical to the Lanier model LCT-5 Transcriber. You can select any of the 4 tracks to play back individually or at the same time. You can punch in a time number code and the machine will quickly cue to that exact position. This machine is for playback only. Selectable speeds: 15/16 and 15/32 inches per second with varispeed (approx +- 50% varispeed). 15/16" is one half the speed of a standard audio cassette. Tested and inspected: appears to be unused and works perfectly. Does not include the original box or manual.

NAB Hub Adapter in your choice of colour. Comes packaged in coloured boxes. Each box comes with 2 adapters.