Repair & Maintenance

Brand new 3000 HZ test tape for calibrating the speed of your cassette decks.

Specs:
- 440 HZ A tone (for quick check with instrument tuner) (or MIDI note 69)
- 3000 hz tone for setting speed with frequency counter and checking wow and flutter
- Recorded in stereo, not full-track

Speed tolerance: 0.16%

Notes
The speed variance to move a half tone from A 440Hz to A# at 466.16 Hz is 5.9%. That's a lot .Most cassette decks should be operating well within half or a third of that range. But if you're doing tape copies you need a much tighter tolerance to avoid cutting off the music or having a huge empty space at the end of the sides, especially on longer tapes of C-50, C-60, and longer 

We have compared the speed of our test tapes against old test tapes from Sony, TEAC, and Nakamichi. Our test tapes play back the 3000 Hz tone with comparable variance as we found with those old test tapes. The variance of our tapes is +- 5 Hz or 0.16%. When adjusting speed your target is 3145 to 3155 Hz. But most of you won't have a frequency counter so we've included a 440HZ A tone to calibrate with any guitar or instrument tuner. You should be able to get within 0.5% using the 440 Hz tone.

If you want to dub your own tapes consider this:

1% speed variance on a 30 minute side is 18 seconds per side
2% speed variance on a 30 minute side is 36 seconds per side
3% speed variance on a 30 minute side is 54 seconds per side 

Higher quality cleaning tape with cleaning solution.

Gently cleans away dust, dirt, and oxide buildup without damaging tape heads, guides, or pinch rollers. This model is precisely made and includes a high quality cleaning fabric. It is recommended to use this tape after every 20 hours of playing time. Dispose after 24 uses or when fluid is depleted.

Brand new test tape for checking the playback levels of your cassette decks.

Specs:
- 315 HZ, 0 dB tone (IEC PRAGUE 1981 Spec)
- Simulated to produce results like the Teac and Sony test tapes.
- Recorded on reel-to-reel duplicator
- Level tolerance: +- 1.2 dB

Notes
This test tape is recorded in stereo quarter-track mode, not full track. It is not 100% accurate because of potential head height misalignments. The results when used with 4-track machines will vary a bit due to a different head configuration on those machines. It will not work for 6 and 8-track machines. This is an amateur tape for quick checks, not a pro laboratory-grade tool.

FREE SHIPPING WORLDWIDE

Brand new test tape for calibrating the playback levels of your cassette decks.

Specs:
- 315 HZ, 0 dB tone (IEC PRAGUE 1981 Spec, approx 250 nWb/m)

Level tolerance: +- 1.2dB

Notes
This test tape is recorded in quarter-track mode, not full track. It is not 100% accurate because of potential head height misalignments. The results when used with 4-track machines will vary a bit due to a different head configuration on those machines. It will not work for 6 and 8-track machines.

This item includes free worldwide shipping by the post with a tracking number. Delivery time is usually 2-3 weeks but could be longer. Tracking is not available on shipments within Canada.

FREE SHIPPING WORLDWIDE

Brand new test tape for calibrating the speed of your cassette decks.

Specs:
- 440 HZ A tone (for quick check with instrument tuner) (or MIDI note 69)
- 3150 hz tone for setting speed with frequency counter and checking wow and flutter
- Recorded in stereo, not full track

Speed tolerance: 0.16%

Notes
The speed variance to move a half tone from A 440Hz to A# at 466.16 Hz is 5.9%. That's a lot .Most cassette decks should be operating well within half or a third of that range. But if you're doing tape copies you need a much tighter tolerance to avoid cutting off the music or having a huge empty space at the end of the sides, especially on longer tapes of C-50, C-60, and longer 

We have compared the speed of our test tapes against old test tapes from Sony, TEAC, and Nakamichi. Our test tapes play back the 3150 Hz tone with comparable variance as we found with those old test tapes. The variance of our tapes is +- 5 Hz or 0.16%. When adjusting speed your target is 3145 to 3155 Hz. But most of you won't have a frequency counter so we've included a 440HZ A tone to calibrate with any guitar or instrument tuner. You should be able to get within 0.5% using the 440 Hz tone.

If you want to dub your own tapes consider this:

1% speed variance on a 30 minute side is 18 seconds per side
2% speed variance on a 30 minute side is 36 seconds per side
3% speed variance on a 30 minute side is 54 seconds per side 

This item includes free worldwide shipping by the post with a tracking number. Delivery time is usually 2-3 weeks but could be longer. Tracking is not available on shipments within Canada.

Brand new test tape for calibrating the speed of your cassette decks.

Specs:
- 440 HZ A tone (for quick check with instrument tuner) (or MIDI note 69)
- 3150 hz tone for setting speed with frequency counter and checking wow and flutter
- Recorded in stereo, not full-track

Speed tolerance: 0.16%

Notes
The speed variance to move a half tone from A 440Hz to A# at 466.16 Hz is 5.9%. That's a lot .Most cassette decks should be operating well within half or a third of that range. But if you're doing tape copies you need a much tighter tolerance to avoid cutting off the music or having a huge empty space at the end of the sides, especially on longer tapes of C-50, C-60, and longer 

We have compared the speed of our test tapes against old test tapes from Sony, TEAC, and Nakamichi. Our test tapes play back the 3150 Hz tone with comparable variance as we found with those old test tapes. The variance of our tapes is +- 5 Hz or 0.16%. When adjusting speed your target is 3145 to 3155 Hz. But most of you won't have a frequency counter so we've included a 440HZ A tone to calibrate with any guitar or instrument tuner. You should be able to get within 0.5% using the 440 Hz tone.

If you want to dub your own tapes consider this:

1% speed variance on a 30 minute side is 18 seconds per side
2% speed variance on a 30 minute side is 36 seconds per side
3% speed variance on a 30 minute side is 54 seconds per side 

FREE SHIPPING WORLDWIDE

Brand new test tapes for calibrating the speed of your cassette decks.

Speed test tape specs:
- 440 HZ A tone (for quick check with instrument tuner) (or MIDI note 69)
- 3150 hz tone for setting speed with frequency counter and checking wow and flutter
- Recorded in stereo, not full track

Speed tolerance: 0.16%

Notes
The speed variance to move a half tone from A 440Hz to A# at 466.16 Hz is 5.9%. That's a lot .Most cassette decks should be operating well within half or a third of that range. But if you're doing tape copies you need a much tighter tolerance to avoid cutting off the music or having a huge empty space at the end of the sides, especially on longer tapes of C-50, C-60, and longer 

We have compared the speed of our test tapes against old test tapes from Sony, TEAC, and Nakamichi. Our test tapes play back the 3150 Hz tone with comparable variance as we found with those old test tapes. The variance of our tapes is +- 5 Hz or 0.16%. When adjusting speed your target is 3145 to 3155 Hz. But most of you won't have a frequency counter so we've included a 440HZ A tone to calibrate with any guitar or instrument tuner. You should be able to get within 0.5% using the 440 Hz tone. Update: There are frequnecy counter smartphone apps, very handy! 

If you want to dub your own tapes consider this:

1% speed variance on a 30 minute side is 18 seconds per side
2% speed variance on a 30 minute side is 36 seconds per side
3% speed variance on a 30 minute side is 54 seconds per side 

Level calbration tape specs:

- 315 HZ, 0 dB tone (IEC PRAGUE 1981 Spec, approx 250 nWb/m)
- Simulated to produce results like the Teac and Sony test tapes.
- Recorded on reel-to-reel duplicator
- Level tolerance: +- 1.2 dB

Notes
This test tape is recorded in stereo quarter-track mode, not full track. It is not 100% accurate because of potential head height misalignments. The results when used with 4-track machines will vary a bit due to a different head configuration on those machines. On 6 and 8-track heads some channels will not show anything. This is an amateur tape for quick checks, not a pro laboratory-grade tool.

This item includes free worldwide shipping by the post with a tracking number. Delivery time is usually 2-3 weeks but could be longer. Tracking is not available on shipments within Canada.

A brand new 1/8" splicing block for repairing audio cassettes

Precision machined from aircraft grade aluminum.

- 90 degree tape cut slot
- Proprietary center tape channel secures tape during use
- Also available in 1/2" and 1/4" formats.

Brand new cassette splicing tape, 3.3mm x 60M (1/8" x 216 feet), 25mm (1 inch) core.

Good quality splicing tape.

Brand new cassette splicing tape, 3.3mm width (0.13"), 25mm (1 inch) core.

Good quality splicing tape from our tape loading department. Most people will never be able to use a whole roll of spicing tape! This end of the roll should be plenty to repair 50 cassettes or make 50 endless loop cassettes. 

Length is approximate.

10 pieces of transparent clear liner audio cassette C-Zeros for making endless loop tape or repairs.

Specs:
 - clear cassette shell
 - transparent liners
 - 5 screw shell style

Please note: the product image above does not reflect the current shell model. The current shell model has a frosted leader and white hubs, as below:

Comes with clear front/clear back cases

You might also need some splicing supplies! We have splicing blocks, splicing tape, and razor blades.

Felt replacement pad for repairing cassette tapes with missing or damaged felt pressure pads. Strip is pre-cut to the most common width of cassette tapes. Simply cut pad to width needed for pad replacement and peel off backing. Pads are self-adhesive. Our cassette tape replacement pads are high quality and one strip should be able to repair 30 tapes or more. Stock location: Toronto

Keep your tape head clean with this cleaning tape

This kit includes a cassette with cleaning tape and 3/4 oz of cleaning fluid (isopropyl alcohol).

Use this cleaning kit after 20 hours of playing time, or when the sound becomes dull. Apply 3 drops of solution on the cleaning tape through the window. Run the cassette until the end. Replace the cleaning tape after 10 uses.

25-Pack wholesale pricing, ideal for shops!

Keep your tape head clean with this cleaning tape

This kit includes a cassette with cleaning tape and 3/4 oz of cleaning fluid (isopropyl alcohol).

Use this cleaning kit after 20 hours of playing time, or when the sound becomes dull. Apply 3 drops of solution on the cleaning tape through the window. Run the cassette until the end. Replace the cleaning tape after 10 uses.

* Now available in multiple colors *

Use these tab plugs to allow recording tab out cassettes on any recorder. Take them out after recording to prevent accidental erasure.

Kit of approximately 25 pieces.

Cassette not included

Original Tesa cassette splicing tape, 0.13 inch x 36 yards on 1 inch hub. Made in Germany. This splicing tape was acknowledged as the best, however it is very old stock so we can't guarantee it.. 

Liquidation - No returns