Pre-Loaded Type II Cassettes

Random Type II High Bias cassettes of various shorter lengths.

These are leftovers from our production. Tape stock could be TDK SA, Maxell XLII-S, Sunkyong cobalt, SKM Chrome, Cintas Vac chrome, or BASF Chrome.

Clear 60 to 70 minute chrome audio cassettes

Quality chrome audio tape in a clear cassette shell, chrome notch, mostly tabs out. A little bit scuffed and with length markings made with a grease pencil - this wipes off easily. Good output level.

C-85 (42:30 per side) Green Wasabi Bridge Transparent cassette shell with azimuth stabilizing bridge, translucent green leader, tabs out, loaded with super high quality chrome tape. 

Vintage High-Bias BASF Chrome Plus C-17 Audio Cassettes in a clear Cassette Shell with graphite-lubricated liners for smooth running, chrome notch, tabs in, The audio tape is most likely BASF Chrome Plus (chrome plus cobalt) with very low tape hiss. Tested and performs well.

C-29 (14:40 per side) blue tint audio cassettes, sonic welded, clear leader, tabs out, with genuine Type II CHROME audio tape. Works on vintage tape recorders with a bias select switch, or you can drill out the notch for auto-sensing recorders.

C-16 (8 minutes per side) chrome tape classic black type 1 shells, A/B markings, red leader, tabs out. 

Your cassette recorder must have a bias selection button to record on these cassettes.

C-06 (3:15 per side) pink transparent 5-screw cassette shell, clear liners, red leader, tabs out, loaded with high bias TDK SA Cobalt (chrome position) music grade audio tape. Needs a chrome tape selector on your tape recorder.

Vintage Maxell XLII 100 minute high bias audio cassettes in a fantastic High Resonance-Damping Cassette Mechanismracy Mechanism. Ideal for recording hot digital sources.

Brand new old stock in factory-sealed wrapper. Branded as 100 minutes, this cassette is specified as 489 feet which equals 104 minutes! The length on your cassette deck will vary depending on its speed calibration. We have speed calibration cassettes available for sale.

Pure Natural Sound --- XLII

Further developed Epitaxial magnetic particles has improved sensitivity by 0.2 dB in the low frequency range and by 1.0 dB in the high-frequency range. (Compared with IEC Type II reference tape U564W)

HR (High Resonance-Damping) cassette mechanism

Outstandaing vibration absorption characteristics have been achieved through the adoption of a New Oval Window Cassette Shell, HR cassette mechanism and DD (dual damping) slip sheets.

Made in Japan

WIDE DYNAMIC RANGE
LOW DISTORTION

62 minute (31:24 minutes per side) Chrome Type II music grade audio tape in a Dark Green Transparent Type 1 cassette shell. Your recorder must have a tape select button for Chrome tapes.

Super high bias Type II Chrome audio cassettes in black shells. Around 1 minute and 20 seconds per side.

If you want duplication you can upload your audio file after placing the order. Duplication is done in realtime on a Nakamichi cassette recorder.

Sounds great! High bias Maxell or BASF cobalt/chrome tape in high quality Made in USA cassette shells with Wasabi hubs, rollers, and bridge.

Specs: 
- 90 minutes (45 per side, approximately)
- high quality Maxell or BASF audio tape
- High bias, type II
- Shape MK10 cassette shell made in USA
- independent bridge for precise azimuth and reduction in resonances
- tabs out
- Chrome notch
- graphite liners for smooth running and low friction
- may have surface scuffs and the length written in grease pencil (wipes off easily)

Tab plugs, cases, and J-cards are sold separately.

120 minutes (60 minutes per side) BASF Chrome tape in a clear Type 2 shell, tabs IN, graphite liners for smooth running, 5 screws. Includes a vintage-style CB-027 case and blank J-Card.

C-20 (10:00 per side), clear 5-screw chrome notch cassette shell, graphite liners, clear leader, tabs IN, loaded with high bias TDK SA cobalt music grade audio tape. 

Random Type II High Bias cassettes of various longer lengths over 20 minutes per side.

These are leftovers from our production. Tape stock could be TDK SA, Maxell XLII-S, Sunkyong cobalt, SKM Chrome, Cintas Vac chrome, or BASF Chrome. The tapes have been erased twice to ensure they are completely blank.

The length is estimated visually and is approximate. Accurate timing is available for an extra fee of $1.00 per piece.

Vintage Maxell Cassette with gold label ( #bling ) - Ideal as a photo prop to show off your vintage cassette decks!

The Maxell XLII Series high bias tape is best for dubbing from digital sources. The tape is engineered for higher output with a very wide dynamic range, bringing out the best from home and car cassette players. These cassettes come in original packaging, unbroken and factory sealed.

Vintage style 2 with gold wrap and square gold label. Price is for 1 Cassette.

Highlights of this vintage:
- Crystal-clear sound: The use of Extra-Fine Epitaxial magentic particles has increased the MOL by 1 dB over the entire frequency range (compared with our UD-II tape).
- PA (Phase accuracy) cassette mechanism: Maxell's PA cassette mechanism assures outstanding phase characteristics.

18 minutes (9 minutes per side) BASF Chrome tape in a transparent Type 1 shell, tabs out. 

You need a bias select button on your cassette recorder, or you can drill out the chrome notch on the shell.

Sounds great! High bias Maxell or BASF cobalt/chrome tape in high quality Made in USA cassette shells with Wasabi hubs, rollers, and bridge.

Specs: 
- 75 to 85 minutes
- high quality Maxell or BASF audio tape
- High bias, type II
- Shape MK10 cassette shell made in USA
- independent bridge for precise azimuth and reduction in resonances
- tabs out
- Chrome notch
- graphite liners for smooth running and low friction
- may have surface scuffs and the length written in grease pencil (wipes off easily)

Tab plugs, cases, and J-cards are sold separately.

30 minutes (15:00 per side) TDK SA or Maxell XLII tape in a clear Type 1 shell, tabs OUT, golf foil graphite liners for smooth running, 5 screws. Includes a vintage-style CB-027 case and blank J-Card. You need a bias select button on your recorder or you can drill out the chrome notch.

The Maxell XLII Series high bias tape is best for dubbing from digital sources. The tape is engineered for higher output with a very wide dynamic range, bringing out the best from home and car cassette players. These cassettes come in original packaging, unbroken and factory sealed.

Vintage style 3 with oval High-Resonanceproof window.. Price is for 1 Cassette.

Highlights of this vintage:
- Pure Natural Sound XL-II: Further developed Epitaxial magnetic particles has improved sensitivity by 1dB in the low-frequency range and and by 3.5 dB in the high frequency range. (Compared with our HIGH (CrO2)-position reference tape 211.)
- HR (High Resonance-Proof) Cassette Mechanism: Outstanding vibration absorption characteristics have been achieved through the adoption of an Oval Window Cassette Shell, HR cassette mechanism and DD (dual damping) slip sheets.

C-84(42:00 per side) Transparent Tabs In sonic-welded Type 1 shell, transparent red leader tape, loaded with chrome music grade audio tape. This is a Type 1 shell so you need a bias select button on your tape recorder, or you can break out the chrome notches.

C-24 (12:14 per side) retro black cassette shell, clear leader tape, tabs IN Type 1 shell, 5 black screws, loaded with TOP QUALITY TDK SA High Bias tape. You need a bias selector switch to record properly.

TDK SA or comparable tape (Maxell XLII, BASF Chrome Extra)

C-42 (approx 21:00 per side) of excellent high bias cobalt/chrome tape (likely Maxell XLII). It's a Type 1 shell so you need a bias selector on your cassette recorder.

C-60 (30:00 per side) Pink, transparent red leader tape, loaded with chrome audio tape. This is a Type 1 shell so you need a bias select button on your tape recorder, or you can break out the chrome notch.